Magento themes sample settings
Change Style

Select one of sample color theme

  • Body
    Background Color
    Text Color
    Link Color
    Background Image
  • Mainmenu
    Background Color
    Text Color
    Link Color
    Background Image
  • Main Home
    Text Color
    Background Image
  • Footer Static
    Text Color
    Link Color
    Background Image
  • Choose Google Font
    Heading Font
    Body Font
    Menu Font

20 may  2019
Product sold out and want an update when its available? just send us an email....

(0) Winkelwagen Subtotaal: € 0,00

Er zitten geen artikelen in uw winkelwagen.

Meer Zichten


Schrijf een review over dit product

Normale Prijs: € 469,00

Special Price € 379,00

Beschikbaarheid: 68NS and Tungsol just click dropdown menu - shipping as stock status
Will be shipped woensdag, mei 22 when ordered within 15 hours and 16 minutes!

* Verplichte Velden

Normale Prijs: € 469,00

Special Price € 379,00


Wait. A passive or active preamp? A relay-switched stepped attenuator volume control for perfect channel matching and unmeasurable distortion? A unique active stage that uses a hybrid tube buffer? And a remote control included? For $349? Yes, yes, yes, yes, and yes. Get prepared as Schiit rewrites the value equation in home audio the same way we’ve done for the desktop.
Yes, Remote Control Included
When you’re talking about gear that doesn’t sit on your desktop (like our headphone amps), you need the convenience of remote control for volume, input switching, output switching, and muting. Saga includes a custom remote control, standard.
It’s Your Choice: Passive or Active
Go ahead. Run Saga in passive mode for a convenient remote-controlled passive preamp that’s ideal for many systems. If you need to drive long cables, or want to add some “tube sound” switch it to the 6SN7-based hybrid tube buffer—a serious buffer running on 200V rails with vanishingly low distortion. 
Relay Stepped Attenuator
Most preamps—passive or active—use a potentiometer for volume control. There’s nothing wrong with this approach, but some pots can have channel imbalance at lower volume levels (so that one channel sounds louder than the other). Saga uses a sophisticated microprocessor-controlled relay-stepped attenuator for perfect channel matching and zero distortion. You can hear it clicking as you turn the volume up and down.
Perfect Companion to Our DACs
Want a remote-controlled system to interface your digital gear with the rest of your system? Stack Saga and Bifrost (or any other of our DACs) for a true no-compromise remote-controlled system.
Made in USA. Really.
By “made in USA,” we mean made in USA. The vast majority of the total production cost of Saga—chassis, boards, assembly, etc—goes to US companies manufacturing in the US. 
5-Year Warranty and Easy Return Policy
Saga is covered by a 5-year limited warranty that covers parts. Labor is covered for 3 years. And if you don’t like your Saga, you can send it back for a refund within 2 weeks. 

Frequency Response: 20Hz-20Khz, -0.2db, 3Hz-200KHz, -3dB (active stage)
THD: <0.002%, 20Hz-20KHz, at 2V RMS (active stage)
IMD: <0.002%, CCIR (active stage)
SNR: >108db, A-weighted, referenced to 1V RMS
Crosstalk: >-75dB, 20Hz-20KHz
Output Impedance: 180 ohms
Gain: Approximately 1 (0dB) through either passive or active stage
Maximum Output: >10V RMS (active stage)
Inputs: 5 RCA pairs, selectable via front switch or remote
Outputs: 2 RCA pairs, selectable via front switch or remote 
Buffer Stage: Hybrid push-pull 6SN7-BJT buffer stage with equalized transconductance 
Volume Control: relay-switched stepped attenuator with discrete thin-film resistors , 64 1dB steps
Power Supply: One 24VA transformer with regulated +/-100V rails, plus 6.3VAC heaters and 5VDC for microprocessor 
Power Consumption: 25W typical
Size: 9” x 6” x 2”
Weight: 6 lbs 

*All measurements made on a Stanford Research SR1+ Audio Analyzer

Schrijf uw Eigen Recensie


Aanvullende Informatie

Color / Finish Nee
model Nee
USB input Nee
Analoge Stage2 Nee
cable option Nee

Product Labels

Gebruik spaties om labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.